The cleaning results are not satisfactory
The dishes are not clean
• The selected washing programme is not applicable for the type of
load and soil.
• The basket is loaded incorrectly so that water cannot reach all
surfaces.
• Spray arm does not turn freely because of incorrect arrangement
of the load.
• The filters are dirty or not correctly installed.
• The quantity of detergent is too little or missing.
Limescales particles on the
dishes
• The salt container is empty.
• The water softener is adjusted on a wrong level.
• The salt container cap is not closed correctly.
The dishes are wet and dull
• No rinse aid has been used.
• The rinse aid dispenser is empty.
There are streaks, milky spots
or a bluish coating on
glasses and dishes
• Decrease the rinse aid dosage.
Dry water drop signs on
glasses and dishes
• Increase rinse aid dosage.
• The detergent can be the cause.
TECHNICAL DATA
Dimensions
Width
Height
Depth
54,5 cm
44,7 cm
48,0-49,0 cm
Electrical connection -
Voltage - Overall power -
Fuse
Data on the electrical connection are on the rating plate on the back of
appliance.
Water supply pressure
Minimum
Maximum
0,8 bar (0,08 MPa)
10 bar (1,0 MPa)
Capacity
6 place settings
INSTALLATION
WARNING!
Make sure that mains plug is disconnected from the mains socket during installation.
Fitting the appliance
Put the appliance adjacent to a water tap and a drain.
When you put the appliance in place, make sure that the water hoses are not kinked or
squashed.
Install the appliance on a kitchen sink, worktop or built-in..
40
Technical data