AEG FAVORIT 44050 Vi User Instructions Download Page 16 | Manualshive

Page: 16 / 48

AEG FAVORIT 44050 Vi User Instructions Download Page 16

Operating Instructions

16

Activating/deactivating the acoustic signal

The acoustic signal can indicate acoustically:
– at which water hardness the water softener is set.
– when a dishwashing cycle has finished.
– when an error has occurred with the dishwasher.

You can switch on/off the acoustic signal in the following way:

1.

Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.

3

If the only LED indicator illuminated is one that belongs to a pro-
gramme button, this means that this dishwashing cycle has been acti-
vated. The dishwashing cycle must be cancelled (RESET):

Press function buttons

2

and

3

simultaneously for approx. 1 second.

The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.

2.

Press function buttons

2

and

3

simultaneously and keep them pressed.

The LED indicators for function buttons

1

to

3

will flash.

3.

Press function button

3

.

The LED indicator for function button

3

will flash.

The

L

display will indicate the current setting:

4.

Pressing function button

3

will change the setting.

5.

Once the

L

display is indicating the required setting, press the ON/

OFF button. The setting is now saved.

In Daily Use

• Check the salt and rinse aid levels.

• Load cutlery and dishes into the dishwasher

• Fill with dishwasher detergent

• Select a wash programme suitable for the cutlery and dishes

• Start the wash programme

The

L

indicator is flashing:

Acoustic signal activated (ex-factory setting)

The

L

indicator is not

flashing:

Acoustic signal deactivated

«
...
14
15
16
17
18
...
»

Summary of Contents for FAVORIT 44050 Vi

















































Reviews:

No comments