AEG FAVORIT 44050 Vi User Instructions Download Page 14

Operating Instructions

14

Filling with Rinse Aid 

Rinse aid is automatically added during the last rinse, ensuring thor-
ough rinsing, spot and streak free drying. 

Only use rinse aid specifically designed for domestic dishwashers. Never 
fill the rinse aid container with any other substance as this would dam-
age the appliance. 

Fill with rinse aid: 

– Prior to using the dishwasher for the first time 
– When the window indicator has a dark centre surrounded by a light 

ring. If there is rinse aid in the container, the indicator window is 
completely dark. 

The rinse aid compartment is on the inside of the dishwasher door.

1.

Open the door.

2.

Press the rinse aid compartment 
release button with your finger.

3.

Fully open the rinse aid compartment 
lid.

4.

Fill with rinse aid exactly up to the 
level marked “max”; this corresponds 
to a quantity of approx. 140 ml.

5.

Close the lid and press until it locks 
into place.

6.

Wipe up any spilt rinse aid with a 
cloth. Otherwise too much foam will 
be formed during the wash.

Summary of Contents for FAVORIT 44050 Vi

















































Reviews: