WHAT TO DO IF…
The appliance does not start or stops during operation.
First try to find a solution to the problem (refer to the chart). If not, contact the service
centre.
Malfunction
Fault code
Possible cause
Possible solution
The appliance
does not fill
with water.
• The start/cancel indica
-
tor light flashes.
• The end-of-programme
indicator light flashes
one time.
The water tap is
blocked or is furred
with limescale.
Clean the water tap.
The water pressure is
too low.
Contact your local wa
-
ter authority.
The water tap is closed. Open the water tap.
The filter in the water
inlet hose is blocked.
Clean the filter.
The connection of the
water inlet hose is not
correct.
Make sure that the con
-
nection is correct.
The water inlet hose is
damaged.
Make sure that the wa
-
ter inlet hose has no
damages.
The appliance
does not drain
the water.
• The start/cancel indica
-
tor light flashes. .
• The end-of-programme
indicator light flashes
two times.
There is a blockage in
the sink spigot.
Clean the sink spigot.
The connection of the
water drain hose is not
correct.
Make sure that the con
-
nection is correct.
The water drain hose is
damaged.
Make sure that the wa
-
ter drain hose has no
damages.
The anti-flood
device operates.
• The start/cancel indica
-
tor light flashes.
• The end-of-programme
indicator light flashes
three times.
Close the water tap
and contact the serv
-
ice centre.
The programme
does not start.
The appliance door is
open.
Close the door correct
-
ly.
The mains plug is not
connected in.
Put in the mains plug.
Blow out fuse in the
household fuse box.
Replace the fuse.
What to do if…
41