background image

 11

Ergorapido should only be used by adults and only for 

normal vacuuming in a domestic environment. Make 

sure the vacuum cleaner is stored in a dry place. 

All servicing and repairs must be carried out by an 

authorized AEG service centre.

This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision 

or instruction concerning use of the appliance by a 

person responsible for their safety.

Please remove the plug from the socket outlet before 

cleaning or maintaining the appliance.

Children should be supervised to ensure that they do 

not play with the appliance.

Packaging material, e.g. plastic bags should not be 

accessible to children to avoid suffocation.

Each vacuum cleaner is designed for a specific 

voltage. Check that your supply voltage is the same 

as that stated on the rating plate on the charging 

adaptor. Use only the original charging adaptor 

designed for this model.

Never use the vacuum cleaner:

•  In wet areas.

•  Close to flammable gases, etc.

•  When housing shows visible signs of damage.

•  On sharp objects or fluids.

•  On hot or cold cinders, lighted cigarette butts, etc.

•  On fine dust, for instance from plaster, concrete, 

flour, hot or cold ashes.

•  Do not leave the vacuum cleaner in direct sunlight.

•  Avoid exposing the vacuum cleaner or battery to 

strong heat.

•  The battery must not be dismantled, short-

circuited, placed against a metal surface or 

exposed to strong heat.

•  Never use the vacuum cleaner without its filters.

•  Do not try to touch the brush roll while the 

cleaner is switched on and the brush roll is 

turning.

Using the vacuum cleaner in the above circumstances 

may cause serious damage to the product. Such 

damage is not covered by the warranty.

Safety precautions  /  Consumer information

Servicing or repairs

In cases of breakdown or faults, your Ergorapido 

must be taken to an authorized AEG service centre. 

If the supply cord or charger is damaged, it must be 

replaced by AEG or its service agent or an equally 

qualified person in order to avoid a hazard.

Consumer information

AEG declines all responsibility for all damages arising 

from any improper use of the appliance or in cases of 

tampering with the appliance.

This product is designed with the environment 

in mind. All plastic parts are marked for recycling 

purposes.  

For details see our web site: www.aeg.co.uk If you 

have any comments on the cleaner or the Instructions 

for Use booklet please e-mail us at: floorcare@aeg.

co.uk 

Please visit our website at www.aeg.co.uk, or for 

Customer Care please call 08445 614614. Calls to this 

number will be charged at 5p per minute at all times 

from a BT Landline.

The symbol 

 on the product or on its packaging 

indicates that this product may not be treated as 

household waste. Instead it should be handed over 

to the applicable collection point for the recycling of 

electrical and electronic equipment. By ensuring this 

product is disposed of correctly, you will help prevent 

potential negative consequences for the environment 

and human health, which could otherwise be caused 

by inappropriate waste handling of this product. For 

more detailed information about recycling of this 

product, please contact your local city office, your 

household waste disposal service or the shop where 

you purchased the product.

Summary of Contents for ergorapido 2in1













Reviews: