English
55
Understanding
the menu structure
Using the menu
Interrupt scrolling:
Press the
II
button (Fig. 3/24) in order to inter-
rupt the automatic picture change. Press the
II
button again in
order to resume picture playback.
Rotating a photo
You can use the
Cursor buttons
to rotate a photo during replay:
Mirror vertically:
Cursor Button “
”
Mirror horizontally:
Cursor Button “
”
Rotate clockwise for 90°:
Cursor Button “
”
Rotate counter-clockwise for 90°:
Cursor Button “
”
Changing the default settings
A large number of default settings can be comfortably changed via the screen
menu.
Press the
SETUP
button (Fig. 3/28) on the remote control to start the
menu for changing the default settings.
NOTE:
Many of these default settings can be changed via both the remote
control and the menu. The difference is: If you change the default
settings via the remote control, these changes will only be valid
until the DVD-Player is switched off or the DVD is changed.
However, any changes made in the menu are permanent.
The Setup menu has two menu levels:
Main menu:
The main level is represented by graphical symbols.
Submenu:
The corresponding sub-menu options can be found under
each of the main menu options.
Navigation and selection
Use the
Cursor Buttons
(Fig. 3/27) (
/
) on the remote control to
browse through the main menu.
In contrast to this, you must use the
Cursor Buttons
(
/
) to move
in the sub-menu.
Select a menu option with the
ENTER
button (Fig. 3/7).
Use the
ENTER
button also to select an option. The selected option is
now highlighted.
Slide control
In some menus you will find slide controls with which you can adjust the
volume or picture brightness, for example. The slide control is used as
follows:
1.
Select with the
ENTER
button.
2.
Move the control with the
Cursor Buttons
(
/
).
3.
Confirm the entry with the
ENTER
button.
05-DVD 4543_AEG_GB.indd 55
25.09.2009 9:00:48 Uhr