AEG DKE 100, Operation And Installation, Page: 31 / 64

OPERATING INSTRUCTIONS
Using the product
31
EN
GL
ISH
6.3.2 Open window sensor
This function makes it possible to detect an open window and automatically activate the Anti-freeze operating mode.
If a sudden reduction is temperature is detected when the radiator is operating normally, anti-freeze mode is activated automatically
to reduce energy wastage. On the display the window and anti-freeze symbols flash together, while the symbol for the operating mode
set by the user stays on.
Reinstating normal operation does not occur automatically, but must be activated by pushing the „M“ key.
Important: Correct operation of this function may depend on where the radiator is positioned in the room, the presence of draughts,
the outside temperature, and how long the window stays open.
6.3.3 Remote control
This function allows the radiator to be controlled using external timers, piloted sockets with telephonic control, and similar devices.
When the function is active, if the radiator‘s power supply is reinstated after being interrupted for more than 30 minutes, when it is
switched on Stand-by mode is not set as normally happens, by Comfort mode starts immediately. The comfort temperature is as set
before the power supply was interrupted. The (optional) presence sensor and open window sensor are deactivated. This means that
the radiator can be switched on without being in the room.
6.4 Utilities
Lock controls
The radiator‘s controls can be locked to prevent set-
tings being changed accidentally, or by unauthorised
people.
To go to lock/unlock mode, hold the „F“ key down.
Once the display reads „LOC“:
Hold the „F“ key down and push the „+“ key to lock
the controls.
Activation is indicated by the relevant icon that swit-
ches on, on the display:
Hold the „F“ key down and push the „-“ key to unlock
the controls.
When this function is activated, in case the supply voltage returns after an interruption exceeding 30min, the operating mode set at
the time of the interruption is recovered. If the operating mode was one of the three programs P1, P2 or P3 the frost free program is
activated instead, because it is necessary to set the time and the day of the week before activating again a program.