AEG D88106, User Manual

Page: 14 / 48

When the Cook time and End time clock functions are used, the oven switches
the heating elements off, when 90% of the time set or calculated has elapsed. The residual
heat present is used to continue the cooking process until the time set has elapsed (3 to
20 mins.).
Countdown
1. Press the Selection button repeatedly until Countdown flashes.
2. Set the desired Countdown using the or button.
After about 5 seconds the display shows the time remaining. Countdown lights up.
When 90% of the time set has elapsed, an audible signal sounds.
When the time has elapsed, an audible signal sounds for 1 minute. “00.00” and Count
-
down flash.
To stop the flashing and the audible signal:
Press any button.
Cook time
1. Select the oven function and temperature.
2. Press the Selection button repeatedly until Cook time flashes.
3. Set the desired cooking time using the or button (max. 09.59 hours).
Cook time lights up.
When the time has elapsed, “00.00” and Cook time flash.
An audible signal sounds for 2 minutes.
The oven switches itself off.
To stop the flashing and the audible signal:
Press any button.
End time
1. Select the oven function and temperature.
2. Press the Selection button repeatedly until End time flashes.
3. Using the or button set the desired switch-off time.
End time lights up and the cook time calculated is displayed.
When the time has elapsed, “00.00” and End time flash.
An audible signal sounds for 2 minutes.
The oven switches itself off.
To stop the flashing and the audible signal:
Press any button.
Cook time and End time combined
Cook time and End time can be used at the same time, if the oven is to be
automatically switched on and off at a later time.
1. Select the oven function and temperature.
14 Operation