WARNING!
Keep children away when
you clean the oven at a high
temperature. The oven
surface becomes very hot
and there is a risk of burns.
CAUTION!
Always turn the oven light on
while using the catalytic
cleaning (if applicable).
Before activating the
catalytic cleaning remove all
the accessories from the
oven.
The walls with a catalytic coating are self-
cleaning. They absorb fat which collects
on the walls while the appliance
operates.
To support the self-cleaning procedure,
heat the empty oven on a regular basis.
1.
Clean the oven floor with warm water
and washing up liquid, then dry it.
2.
Set the oven temperature to 250 °C
and let the oven operate for 1 hour.
3.
When the appliance is cool, clean it
with a soft and moist sponge.
12.4
Cleaning the cavity
embossment
The cleaning procedure removes
limestone residue from the cavity
embossment after cooking with steam.
For the function: Steam Bake
we recommend to do the
cleaning procedure at least
every 5 - 10 cooking cycles.
1.
Put 250 ml of white vinegar into the
cavity embossment at the bottom of
the oven.
Use maximum 6% vinegar without
any additives.
2.
Let the vinegar dissolve the residual
limestone at the ambient
temperature for 30 minutes.
3.
Clean the cavity with warm water and
a soft cloth.
12.5
Removing the shelf
supports
To clean the oven, remove the shelf
supports.
1.
Pull the front of the shelf support
away from the side wall.
2.
Pull the rear end of the shelf support
away from the side wall and remove
it.
2
1
The retaining pins on the
telescopic runners must
point to the front.
Install the shelf supports in the opposite
sequence.
CAUTION!
Make sure that the longer
fixing wire is in the front. The
ends of the two wires must
point to the rear. Incorrect
installation can cause
damage to the enamel.
www.aeg.com
32
Summary of Contents for CIB6740ACB
Page 1: ...USER MANUAL EN User Manual Cooker CIB6740ACB CIB6740ACM ...
Page 38: ...www aeg com 38 ...
Page 39: ...ENGLISH 39 ...
