1
2
A
2.
Pull up the trim.
3.
Remove the glass panels.
To replace the glass panels,
do the same steps in
reverse. Before you lower
the trim, attach the A trim
part to the door. Refer to the
image.
11.8
Replacing the lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
1.
Turn off the oven.
Wait until the oven is cooled down.
2.
Disconnect the oven from the mains.
3.
Put a cloth on the bottom of the
cavity.
The back lamp
The lamp glass cover is at
the back of the cavity.
1.
Turn the lamp glass cover
counterclockwise to remove it.
2.
Clean the glass cover.
3.
Replace the oven lamp with a
suitable 300 °C heat-resistant oven
lamp.
Use the same oven lamp type.
4.
Install the glass cover.
12.
TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1
What to do if...
Problem
Possible cause
Remedy
You cannot activate the ap-
pliance.
The appliance is not connec-
ted to an electrical supply or
it is connected incorrectly.
Check if the appliance is cor-
rectly connected to the elec-
trical supply.
You cannot activate the ap-
pliance.
The fuse is blown.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
You cannot activate or oper-
ate the hob.
You touched 2 or more sen-
sor fields at the same time.
Touch only one sensor field.
You cannot activate or oper-
ate the hob.
There is water or fat stains
on the control panel.
Clean the control panel.
www.aeg.com
30
