background image

8. To deactivate the function, press  .

You can also press 0 on the left front

control bar.

A signal sounds and the indicator above

the symbol disappears. The heat setting

level changes to 0.

You can set a timer while PowerSlide

operates. In this case the timer does not

deactivate the cooking zones when the

set time runs out. The timer affects all

three cooking areas activated by the

function at the same time.

8. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

8.1 Cookware

For induction cooking zones

a strong electro-magnetic

field creates the heat in the

cookware very quickly.

Use the induction cooking zones with

suitable cookware.
• The bottom of the cookware must be

as thick and flat as possible.

• Ensure pan bases are clean and dry

before placing on the hob surface.

• In order to avoid scratches, do not

slide or rub the pot across the ceramic

glass.

Cookware material
• correct: cast iron, steel, enamelled

steel, stainless steel, multi-layer

bottom (with a correct marking from a

manufacturer).

• not correct: aluminium, copper,

brass, glass, ceramic, porcelain.

Cookware is suitable for an induction

hob if:
• water boils very quickly on a zone set

to the highest heat setting.

• a magnet pulls on to the bottom of the

cookware.

Cookware dimensions
• Induction cooking zones adapt to the

dimension of the bottom of the

cookware automatically.

• The cooking zone efficiency is related

to the diameter of the cookware. The

cookware with a diameter smaller

than the minimum receives only a part

of the power generated by the

cooking zone.

• For both safety reasons and optimal

cooking results, do not use cookware

larger than indicated in "Cooking

zones specification". Avoid keeping

cookware close to the control panel

during the cooking session. This

might impact the functioning of the

control panel or accidentally activate

hob functions.

Refer to "Technical data".

Steam Vented Lids
To further optimize the cooking sessions

alongside the hood you can use the

special Steam Vented Lids with your

cookware. The lids are designed to direct

the steam produced inside the pot

towards the hood, minimizing unwanted

cooking smells and excessive humidity in

the kitchen. The lids are available to buy

separately in several sizes to fit most

common cookware types. For more

information visit our website.

8.2 The noises during

operation

If you can hear:

ENGLISH

21

Summary of Contents for CDE84779FB

































Reviews: