Problems with Wi-Fi signal
Possible cause
Remedy
The wireless network signal is weak.
Move router as close to the appliance as possi‐
ble.
The wireless signal is disrupted by another mi‐
crowave oven placed near the appliance.
Turn off the microwave oven.
12.2 How to manage: Error codes
When the software error occurs, the display shows error message.
In this section, you will find the list of the problems that you can handle on your own.
Code and description
Remedy
F111 - Food sensor is not correctly inserted in‐
to the socket.
Fully plug Food sensor into the socket.
F601 - there is a problem with Wi-Fi signal.
Check your network connection. Refer to "Be‐
fore first use" chapter, Wireless connection.
F604 - the first connection to Wi-Fi failed.
Turn the appliance off and on and try again. Re‐
fer to "Before first use" chapter, Wireless con‐
nection.
F908 - the appliance system cannot connect
with the control panel.
Turn the appliance off and on.
When one of these error messages continues to appear on the display, it means a faulty
subsystem may have been disabled. In such a case contact your dealer or an Authorized
Service Centre. If one of these errors occurs, the rest of the appliance functions will continue to
work as usually.
Code and description
Remedy
F131 - the temperature of the steamer sensor
is too high.
Turn the appliance off and wait until it cools
down. Turn the appliance on again.
43/56
TROUBLESHOOTING
Summary of Contents for BSE998230M
Page 1: ...USER MANUAL EN User Manual Steam oven BSE998230M BSE99823BM BSK998230B BSK998230M ...
Page 53: ...53 56 ...
Page 54: ...54 56 ...
Page 55: ...55 56 ...