![AEG BSE882320M User Manual Download Page 46](http://html.mh-extra.com/html/aeg/bse882320m/bse882320m_user-manual_13107046.webp)
11.4
Steam Cleaning
Remove as much dirt as possible
manually.
Remove the accessories and the shelf
support to clean the side walls.
The steam cleaning functions support
the steam cavity cleaning of the
appliance.
For a better performance
you should start the cleaning
function when the appliance
is cool.
The specified time is related
to the duration of the
function and does not
include the time required for
cleaning of the cavity by the
user.
When the steam cleaning function is
active, the light is off.
1.
Fill the water drawer to the maximum
level (around 950 ml of water) until
the acoustic signal sounds or the
display shows the message.
2.
Choose the steam cleaning function
in the menu: Cleaning.
Steam Cleaning
- the duration of the
function is around 30 minutes.
a)
Activate the function.
b)
An acoustic signal sounds when
the programme is completed.
c)
Press the rotary knob to
deactivate the signal.
Steam Cleaning Plus
- the duration
of the function is around 75 minutes.
a)
Spray a suitable detergent
uniformly in the oven cavity on
both enamel and steel parts.
Before you start the cleaning
procedure, make sure that the
appliance is cold.
b)
Activate the function.
After around 50 minutes an
acoustic signal sounds when the
first part of the programme is
completed.
c)
Wipe the internal surface of the
appliance with a non-abrasive
surface care sponge. You can use
warm water or oven detergents
to clean the cavity.
d)
The final part of the procedure
starts. The duration of this stage
is around 25 minutes.
3.
Wipe the internal surface of the
appliance with a non-abrasive
sponge. You can use warm water to
clean the cavity.
After cleaning keep the appliance door
open for approximately 1 hour. Wait until
the appliance is dry. To speed up the
drying you can heat up the appliance
with hot air at temperature 150 °C for
approximately 15 minutes. You can get
maximum effects of the cleaning function
if you manually clean the appliance
immediately after the function ends.
11.5
Cleaning Reminder
This function reminds you that the
cleaning is necessary and that you should
perform the function: Steam Cleaning
Plus
11.6
Steam generation system
- Descaling
When the steam generator operates,
there is an accumulation and deposition
of limestone inside because of calcium
contents in the water. This can have a
negative effect on the steam quality, on
the performance of the steam generator
and on the food quality. To prevent this,
clean the steam generation circuit from
residual stone.
Remove all accessories.
Select the function from the menu:
Cleaning. The user interface will guide
you through the procedure.
The duration of the complete procedure
is about 2 hours.
The light in this function is off.
1.
Make sure that the water drawer is
empty.
2.
Press
.
3.
Put the grill- / roasting pan on the
first shelf position.
4.
Press the rotary knob.
5.
Put 250 ml of the descaling agent in
the water drawer.
6.
Fill the remaining part of the water
drawer with water to the maximum
www.aeg.com
46
Summary of Contents for BSE882320M
Page 1: ...USER MANUAL EN User Manual Steam oven BSE882320M BSK882320M ...
Page 54: ...www aeg com 54 ...
Page 55: ...ENGLISH 55 ...