AEG BPS35112AM, User Manual

Page: 35 / 40

Problem Possible cause Remedy
The display shows "F102". • You did not fully close
the door.
• The door lock is defec-
tive.
• Fully close the door.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows
"F102" again, contact the
Customer Care Depart-
ment.
The display shows an error
code that is not in this table. There is an electrical fault. • Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
There is no good cooking
performance using the func-
tion: True Fan Cooking
PLUS. You did not fill the cavity
embossment with water. Refer to "Setting the func-
tion: True Fan Cooking
PLUS".
You want to activate the
True Fan Cooking PLUS
function, but the Plus Steam
indicator does not switch on. You did not select the heat-
ing function that support
Plus Steam. Refer to "Setting the func-
tion: True Fan Cooking
PLUS".
You want to activate the
True Fan Cooking PLUS
function, but the Plus Steam
indicator does not switch on. The Plus Steam does not
work. Deactivate the appliance
with the house fuse or the
safety switch in the fuse box
and activate it again.
Refer to "Setting the func-
tion: True Fan Cooking
PLUS".
The water in the cavity em-
bossment does not boil. The temperature is too low. Set the temperature at least
to 110 °C.
Refer to "Hints and tips"
chapter.
The water comes out of the
cavity embossment. There is too much water in
the cavity embossment. Deactivate the oven and
make sure that the appliance
is cold. Wipe the water with
a cloth or sponge. Add the
correct amount of water to
the cavity embossment. Re-
fer to the specific procedure.
ENGLISH 35