The display shows: the cooking time,
the duration symbol
, a default
weight, a unit of measurement (kg,
g).
4.
Touch
or the settings save auto-
matically after five seconds.
5.
The appliance activates. A symbol of
the weight unit flashes in the display.
During this time you can change the
default weight value with
or
.
Touch
.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
flashes. The appliance deactivates.
7.
Touch a sensor field or open the
door to stop the acoustic signal.
8.5
Automatic programmes
with the core temperature
sensor
The core temperature of the food is de-
fault and fixed in programmes which use
the core temperature sensor. The pro-
gramme ends when the appliance is at
the set core temperature.
1.
Activate the appliance.
2.
Touch
again and again until the
display shows
.
3.
Install the core temperature sensor
(refer to "The core temperature sen-
sor").
4.
Touch
or
to see the core
temperature sensor programmes.
When a core temperature sensor
programme is set, the display shows
the cooking time,
and
.
5.
Touch
or the settings save auto-
matically after five seconds.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
The appliance deactivates.
7.
Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
9.
USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
9.1
Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to set:
• The oven temperature: refer to the ta-
ble for roasting in the recipe book.
• The core temperature: refer to the ta-
ble for the core temperature sensor in
the recipe book.
Only use the core temperature
sensor supplied or the correct re-
placement parts.
1.
Activate the appliance.
2.
Put the tip of the core temperature
sensor (with
on the handle) into
the centre of the meat.
3.
Put the plug of the core temperature
sensor into the socket at the front of
the appliance. The display shows
and the default set core tem-
perature. The temperature is 60 °C
for the first operation, and the last
set value for each subsequent oper-
ation.
16 www.aeg.com
Summary of Contents for BP7304021
Page 1: ...BP7304021 BP7304151 EN User manual ...
Page 46: ...46 www aeg com ...
Page 47: ...ENGLISH 47 ...
