manualshive.com logo in svg

AEG B 99697-5, Operating Instructions Manual, Page: 40 / 56

Share
Download
AEG B 99697-5 Operating Instructions Manual Download Page 40

40

6. Using the arrow buttons 

 or

 select the length of Pyroluxe.

–

PYROLUXE LIGHT

 for a light

degree of soiling (2:15),

–

PYROLUXE NORMAL

 for a normal

degree of soiling (2:45),

–

PYROLUXE HEAVY

 for a high

degree of soiling (3:15).

The respective DURATION 

 is displayed.

Pyrolytic cleaning then starts.

Do not open the oven door during the
heating up time, otherwise the
process is cancelled.

The oven light does not work.
When a pre-set temperature is
reached, the door is locked.
The lock symbol is active until the door
is unlocked again.

Changing the switch-off time for the

pyrolytic cleaning:

The switch-off time can be delayed using

the clock function END 

 .

Reminder function for pyrolytic
cleaning

The reminder function detects when

pyrolytic cleaning is required and alerts the user
to this fact.

The reminder function is switched on when

the appliance is set to the factory settings.

It can be switched on and off in the Options

menu under the menu option CLEANING MENU.

How it works:
If after an oven function ends ‘

PYROLUXE

?’

is briefly displayed, confirm using the OK 
button.

Using the arrow buttons 

 or 

 you

can now select the following settings:

PYROLUXE NORMAL

02.45

Summary of Contents for B 99697-5

























































Reviews:

No comments