Installation guide
1.
The telescopic rod can be extended according to the height of the window.
2.
Lift the locking lever of the window slider kit.
3.
Slide the extension piece from the main housing.
4.
Align the 3 hooks on the extending piece to the 3 slots on the end of the telescopic piece and slide the 3
hooks into the slots, then press down the extending piece to lock the slots.
5.
Slide the combined telescopic rod back into the window kit.
6.
Stand the window kit in the gap between the window and window frame.
7.
Open the adjustment latch.
8.
Extend the extension arm so it fits firmly to the window frame ceiling.
9.
Close the adjustment latch.
10.
Remove the adhesives from the window frame connector. Stick one side to the window frame, and one side
to the wall. Adjust the tension using the buckle. The connection points can be screwed in place if desired.
The window frame connector also feature a plastic clasp that can be opened if the widow needs to be
opened.
11.
Cut the decoration film to an appropriate length and stick on the extend pieces.
12.
Put the Adhesive Velcro tabs on the window frame.
13.
Attach the side covers to seal the top and the bottom parts of the window.
14.
Fit the hose connector to the hose end.
15.
Extend the hose end and screw the hose connecter securely in place.
16.
Pull the hose cover over the hose and close the Velcro tabs firmly together.
17.
Clip the hose connection in place to the window kit frame.
18.
Connect the hose to the portable AC unit.
19.
Start the machine.
Window sliding kit
Hose cover (150mm diameter)
Hose mounting (for 150mm hoses)
Window frame connector
Telescopic extension pieces (35cm x2)
Cover for window sliding kit rail
Window side covers
Adhesive Velcro tabs for side covers
Window compatibility
• For side hinged inward window types, please make sure that there is enough space
between the window and the wall for hose mounting.
• In some cases, the handle might block the window from closing tightly.
Components
1
5
2
6
3
7
4
8
EN
