2
1
6.
Fit the appliance door on the upper
door hinge pin.
7.
Remove the lower hinge. Put over
the pin in the direction of the arrow.
8.
Unscrew and install the screw on the
opposite side.
9.
Install the lower hinge on the
opposite side leaving the position of
the door unchanged.
10.
Screw in the one screw in the place
set free on the other side as well as
the adjustable feet (2 pieces).
11.
Remove and install the handle on the
opposite side.
1
2
3
4
CAUTION!
Reposition, level the
appliance, wait for at least
four hours and then connect
it to the power socket.
Do a final check to make
sure that:
• All screws are tightened.
• The magnetic seal
adheres to the cabinet.
• The door opens and
closes correctly.
If the ambient temperature
is cold (i.e. in Winter), the
gasket may not fit perfectly
to the cabinet. In that case,
wait for the natural fitting of
the gasket.
In case you do not want to
carry out the above
mentioned operations,
contact the nearest
Authorised Service Centre.
The Authorised Service
specialist will carry out the
reversibility of the doors at
your cost.
8.6
Electrical Connection
CAUTION!
Any electrical work required
to install this appliance
should be carried out by a
qualified electrician or
competent person.
WARNING!
This appliance must be
earthed.
The manufacturer declines
any liability should these
safety measures not be
observed.
The wires in the mains lead are coloured
in accordance with the following code:
www.aeg.com
14
