38
PD201808 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (12-30 kW) V.2-18 EN
38
Setting item
LCD display
Instruction
next line. After editing the four digits, press “ENT” to save
the edition and press “ESC” to exit.
The currency types include EUR, POD, CNY and USD.
Setup Date/Time
S e t u p D a t e / T i m e
D a t e : 2 0 1 2 / 0 1 / 1 5
T i m e : 1 2 : 1 4 : 3 0
1
Access the interface and edit the date and time through
“ ” or “ ”. Then press “ENT” again to edit the next line.
After editing the four digits, press “ENT” to save and press
“ESC” to exit.
Language
Curr. Language : English
English
Chinese
German
Dutch
Access the interface and edit the language through “ ” or
“ ”. Then press “ENT” again to save the edition and press
“ESC” to exit. The default language is English.
Select Country
Country
: Australia
Germany
England
Australia
Greece
Denmark
Holland
Access the interface and select country through “ ” or
“ ”. And then press “ENT” again to save the edition and
press “ESC” to exit.
Setup mode
S e t u p M o d e l : I n d e p e n d
I n d e p e n d
P a r a l l e l
The DC input mode includes “independent” and “parallel”:
“independent mode” is the independent MPPT of Track A
and Track B; “parallel mode” is the parallel MPPT of Track A
and Track B. The default mode is “independent”.
The input mode setting is invisible if the inverter is in
power generation mode. It is only available when the DC
power is on and the AC power is turned off
Press “ ” or “ ” to select the setting mode and press
“ENT” to save the setting or “ESC” to return.
If the situation of section 5.4.8 occurs, it is necessary to
switch the DC input to “parallel” mode.