background image

26

818 20 29-00/2

Maintenance and Cleaning

Before any maintenance or cleaning work is carried out DISCONNECT 
the appliance from the ELECTRICITY supply.

Internal Cleaning

0

 

1.

Clean the inside and accessories with warm water and bicarbonate of 
soda (5 ml to 0.5 litre of water). Rinse and dry thoroughly.

Warning! 

• Do not use detergents, abrasive powders, highly perfumed cleaning 

products, wax polishes or cleaning products containing bleach or 
alcohol.

2.

Regularly check the door seals and wipe clean to ensure they are clean 
and free from debris. 

External Cleaning

0

 

1.

Wash the outer cabinet with warm soapy water.

Warning! 

• Do not use abrasive products

• There are sharp edges on the underside of the product  so care should 

be taken when cleaning.

Accumulation of dust at the condenser increases energy consumption. 
For this reason carefully clean the condenser at the back of the appli-
ance once a year with a soft brush or a vacuum cleaner.

Regulations, Standards, Guidelines

This appliance was designed for household use and was manufactured 
in accordance with the appropriate standards. The necessary measures 
in accordance with appliance safety legislation regulations (GSG), acci-
dent prevention regulations for refrigeration appliances (VBG 20) and 
the regulations of the German Society of Electrical Engineers (VDE) 
were observed in the manufacture of this appliance.
The refrigerant circuit has been checked for leaks.

This appliance is in accordance with the following EU guidelines:
– 73/23/EWG dated 19 February 1973 - low voltage guidelines.
– 89/336/EWG dated 3 May 1989

(including guideline change notice 92/31/EWG) - EMV guideline 

Summary of Contents for ARCTIS 2494-6 GA

































Reviews: