23
9.
TROUBLESHOOTING
Problem
Possible solution
You cannot activate the
appliance.
Make sure that the mains plug is connected to
the mains socket.
Check fuse in fuse box (domestic installation).
The program does not start.
Press Start/Pause.
Make sure that the appliance door is closed.
The appliance door does not
close.
Make sure that the installation of the filter is
correct.
Make sure that the laundry is not caught
between the appliance door and the rubber seal.
The appliance stops during
operation.
Load is too small, increase the load or use the
Time Drying program.
The cycle time is too long or
unsatisfactory drying result.
Make sure that the weight of the laundry is
suitable for the duration of the program.
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry in the
washing machine again.
Ensure that the room temperature is higher than
+5°C and lower than +35°C. Optimal room
temperature is 19°C to 24°C.
Set the Time Drying or the Extra Dry program. (It
can happen that some area remains humid when
drying big items (e.g. bed sheets ))
The display shows “
”.
If you want to set a new program, deactivate and
activate the appliance.
Make sure that the options are suitable for the
program.
The display shows Error code.
Alarm Code:
The appliance door is open or not
closed correctly. Please check the
door!
The main supply is unstable. Wait
until the main supply is stable.
No communication between
electronic elements of the appli-
ance. Switch off and switch on
again.
Isolated wet spots on fabrics
after “Vapour Refresh” cycle
completed.
Water pressure too low - please check that the
water pressure is between 200 kPa and 800
kPa.
9.1
Troubleshooting
Summary of Contents for ADS854R5SB
Page 1: ...TUMBLE DRYER ADS854R5SB USER MANUAL ...
Page 30: ...30 www aeg com NOTE ...
Page 31: ...31 NOTE ...