background image

3.2 

Display

A

B

C

F E D

A.

Timer indicator

B.

FROSTMATIC function

C.

Temperature indicator

D.

Alarm indicator

E.

ChildLock function

F.

MinuteMinder function

3.3 

Switching on

Connect the mains plug to the power

socket.
Press the appliance ON/OFF button if

the display is off.

The alarm buzzer could operate after few

seconds.

The temperature indicators show the set

default temperature.

To reset the alarm refer to "High

temperature alarm".
To select a different set temperature

refer to "Temperature regulation".
If DEMO appears on the display, refer to

"Troubleshooting".

If the door remains open for

some minutes, the light will

turn off automatically. The

light is reset by closing and

opening the door itself.

3.4 

Switching off

Press the appliance ON/OFF for 5

seconds.

The display switches off.

To disconnect the appliance from the

power, disconnect the mains plug from

the power socket.

3.5 

Temperature regulation

The set temperature of the freezer may

be adjusted by pressing the temperature

button.

Default temperature:

• -18°C for the freezer

The temperature indicator shows the set

temperature.

The set temperature will be

reached within 24 hours.

After a power failure the set

temperature remains stored.

3.6 

FROSTMATIC function

The FROSTMATIC function accelerates

the freezing of fresh food and, at the

same time, protects foodstuffs already

stored from undesirable warming.

1.

To activate this function press the

Mode button until the corresponding

icon appears.

The FROSTMATIC indicator flashes.

2.

Press the OK button to confirm.

TheFROSTMATIC indicator is shown.

This function stops automatically after 52

hours.
To switch off the function before its

automatic end repeat the procedure

until the FROSTMATIC indicator turns

off.

3.7 

ChildLock function

Activate the ChildLock function to lock

the buttons from unintentional

operation.

1.

Press Mode button until the

corresponding icon appears.

The ChildLock indicator flashes.

2.

Press OK to confirm.

The ChildLock indicator is shown.

To deactivate the ChildLock function,

repeat the procedure until the ChildLock

indicator goes off.

3.8 

MinuteMinder function

The MinuteMinder function is to be used

to set an acoustic alarm at the preferred

time, useful for example when a recipe

requires to cool down food products for

a certain period of time.
It is also useful when a reminder is

needed in order not to forget the bottles

placed in the freezer for fast cooling.

www.aeg.com

6

Summary of Contents for ABE81226NC

















Reviews: