background image

clean regularly surfaces that can come in contact

with food and accessible drainage systems;

WARNING: Keep ventilation openings, in the

appliance enclosure or in the built-in structure, clear of

obstruction.

WARNING: Do not use mechanical devices or other

means to accelerate the defrosting process, other than

those recommended by the manufacturer.

WARNING: Do not damage the refrigerant circuit.

WARNING: Do not use electrical appliances inside the

food storage compartments of the appliance, unless

they are of the type recommended by the

manufacturer.

Do not use water spray and steam to clean the

appliance.

Clean the appliance with a moist soft cloth. Only use

neutral detergents. Do not use abrasive products,

abrasive cleaning pads, solvents or metal objects.

When the appliance is empty for long period, switch it

off, defrost, clean, dry and leave the door open to

prevent mould from developing within the appliance.

Do not store explosive substances such as aerosol

cans with a flammable propellant in this appliance.

If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Do not use the appliance before

installing it in the built-in structure due

to safety manner.

• Follow the installation instructions

supplied with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Make sure the air can circulate

around the appliance.

• At first installation or after reversing

the door wait at least 4 hours before

connecting the appliance to the power

supply. This is to allow the oil to flow

back in the compressor.

• Before carrying out any operations on

the appliance (e.g. reversing the

door), remove the plug from the

power socket.

www.aeg.com

4

Summary of Contents for ABB812E6NC





















Reviews: