Downloaded from www.vandenborre.be
10.
INSTALLATION
10.1
Positioning
WARNING!
If you are discarding an old appli-
ance that has a lock or catch on
the lid, you must ensure that it is
made unusable to prevent young
children being trapped inside.
The appliance shall have the
plug accessible after installation.
This appliance can be installed in a dry,
well ventilated indoor (garage or cellar),
but for optimum performance install this
appliance at a location where the ambi-
ent temperature corresponds to the cli-
mate class indicated on the rating plate
of the appliance:
Cli-
mate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
10.2
Electrical connection
Before plugging in, ensure that the volt-
age and frequency shown on the rating
10.3
Ventilation requirements
1.
Put the freezer in horizontal position
on a firm surface. The cabinet must
be on all four feet.
2.
Make sure that the clearance be-
tween the appliance and rear wall is
5 cm.
3.
Make sure that the clearance be-
tween the appliance and the sides is
5 cm.
The airflow behind the appliance must
be sufficient.
11.
NOISES
There are some sounds during normal
running (compressor, refrigerant circula-
tion).
