AEG A18PDB, Original Instructions Manual

Page: 17 / 24

17
17
1
2
1
Remove the battery pack
before starting any work
on the machine.
Remove the battery pack
before starting any work
on the machine.
1
2
1
2
click
TECHNICAL DATA BRUSHLESS HAMMER DRILL A18PDB
Rated voltage 18 V
Drilling capacity in steel 13 mm
Drilling capacity in wood 65 mm
Drilling capacity in brick and tile 13 mm
Wood screws (without pre-drilling) 10 mm
No-load speed, 1st gear / 2nd gear 0 - 500 / 0 - 2100 min -1
Impact rate 1st gear / 2nd gear 0 - 7500 / 0 - 31500 min -1
Torque (2.0 Ah / 4.0 Ah / 6.0 Ah)* 57 Nm / 61 Nm / 62 Nm
Drill chuck range 1.6 - 13 mm
Weight - not including battery pack 1.4 kg
Measured sound values determined according to EN 62841:
A-weighted sound pressure level
L
pA
= 97.0 dB(A)
Uncertainty K 5 dB (A)
A-weighted sound power level L
WA
= 108.0 dB(A)
Uncertainty K 5 dB (A)
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 62841:
Impact drilling into concrete
a
h,ID
= 11.5 m/s
2
Uncertainty K 1.5 m/s
2
Drilling into metal a
h,D
= 1.7 m/s
2
Uncertainty K 1.5 m/s
2
* test to AEG standard N 877318
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but
not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.