AEG 97153, Instructions For Use Manual

Page: 32 / 96

www.aeg-automotive.com 32
MAINTENANCE
AND CARE
Cleaning, maintenance and storage
Caution!
Power off the monitor and unplug the vehicle‘s 12 V
power supply before cleaning the monitor.
•
Clean the reversing camera system with a dry
cloth. Do not use liquids or harsh cleaners as
these may cause discoloration and damage to the
surface of the equipment and the backup camera
system may be damaged! Do not allow liquids to
enter the equipment! Never immerse the equip-
ment in liquids! Only operate the backup camera
system when dry.
•
Always keep / store the backup camera system
in a dry environment! Moisture may damage the
electronics of the backup camera system!
•
Do not store the backup camera system under
extreme temperature fluctuations! Condensation
generated under these conditions could damage
the electronics!
•
If the camera joint loosens over time you may
readjust it. There are 4 screws at the back of the
camera inside the camera bracket. Slightly tighten
these screws to secure the swiveling camera. This
requires the camera to be dismantled.
Declaration of Conformity
MTS MarkenTechnikService Gmbh & Co.KG hereby
declares the radio equipment model Reversing Cam-
era System RV 4.3 complies with Directive 2014/53/
Eu. The full text of the Eu declaration of conformity
can be found at the following Internet address:
www.iuqr.de/97153_Konformitaetserklaerung
Disposal
Any disposal and recycling of the backup
camera system must comply with legal
provisions. Please contact your municipality or a
waste management company for information.
Dispose of the backup camera system according to
the EC Directive on waste electrical and electronic
equipment 2012/19/EC (WEEE).
Follow the applicable waste management laws when
disposing of packaging.
Service
Should you have any questions regarding com-
missioning or operating in spite of studying these
operating instructions, or if a problem should occur
against all expectations, please get in contact with
your specialist supplier.