Problem
Possible cause
Remedy
The diameter of the bottom of the
cookware is incorrect for the activa‐
ted function or function mode.
Use cookware with a diameter appli‐
cable to the activated function or
function mode. Use cookware with a
diameter smaller than 160 mm on a
single section of the flexible induc‐
tion cooking area. Refer to "Flexible
induction cooking area".
A cooking zone deactivates.
A warning message saying the
cooking zone is going to switch off
comes on.
Automatic Switch Off deactivates
the cooking zone.
Deactivate the hob and activate it
again.
Refer to "Daily use".
and a message come on.
Lock operates.
Refer to "Daily use".
O - X - A appears.
Child Lock operates.
Refer to "Daily use".
blinks.
There is no cookware on the zone.
Put cookware on the zone.
The cookware is unsuitable.
Use suitable cookware. Refer to
"Hints and tips".
The diameter of the bottom of the
cookware is too small for the zone.
Use cookware with correct dimen‐
sions. Refer to "Technical data".
FlexiBridge operates. One or more
sections of the function mode which
operates are not covered by the
cookware.
Place the cookware on the correct
number of sections of the function
mode which operates or change the
function mode. Refer to "Flexible in‐
duction cooking area".
PowerSlide operates. Two pots are
placed on the flexible induction
cooking area.
Use only one pot. Refer to "Flexible
induction cooking area".
and a number come on.
There is an error in the hob.
Deactivate the hob and activate it
again after 30 seconds. If
comes
on again, disconnect the hob from
the electrical supply. After 30 sec‐
onds, connect the hob again. If the
problem continues, speak to an Au‐
thorised Service Centre.
You can hear a constant beep
noise.
The electrical connection is incor‐
rect.
Disconnect the hob from the electri‐
cal supply. Ask a qualified electri‐
cian to check the installation.
Cookware heats up longer than 5
min.
The bottom of the cookware is not
induction compatible.
Use cookware with correct (flat,
magnetic) bottom. Refer to "Hints
and tips".
11.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Make sure, you
operated the hob correctly. If not the
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The information about
guarantee period and Authorised Service
Centres are in the guarantee booklet.
ENGLISH
23
