Problem
Possible cause
Remedy
Residual heat indicator
does not come on.
The zone is not hot because
it operated only for a short
time or the sensor is dam‐
aged.
If the zone operated sufficient‐
ly long to be hot, speak to an
Authorised Service Centre.
There is no sound when
you touch the panel sen‐
sor fields.
The sounds are deactivated. Activate the sounds. Refer to
"Daily use".
The flexible induction
cooking area does not
heat up the cookware.
The cookware is in a wrong
position on the flexible induc‐
tion cooking area.
Place the cookware in the cor‐
rect position on the flexible in‐
duction cooking area. The po‐
sition of the cookware de‐
pends on the activated func‐
tion or function mode. Refer to
"Flexible induction cooking
area".
The diameter of the bottom
of the cookware is incorrect
for the activated function or
function mode.
Use cookware with a diameter
applicable to the activated
function or function mode. Re‐
fer to "Flexible induction cook‐
ing area".
The indicator above the
symbol comes on.
Child Safety Device or Lock
operates.
Refer to "Daily use".
The control bar blinks.
There is no cookware on the
zone or the zone is not fully
covered.
Put cookware on the zone so
that it fully covers the cooking
zone.
The cookware is unsuitable. Use cookware suitable for in‐
duction hobs. Refer to "Hints
and tips".
The diameter of the bottom
of the cookware is too small
for the zone.
Use cookware with correct di‐
mensions. Refer to "Technical
data".
FlexiBridge (Flexible Bridge)
operates. One or more sec‐
tions of the function mode
which operates are not cov‐
ered by the cookware.
Place the cookware on the
correct number of sections of
the function mode which oper‐
ates or change the function
mode. Refer to "Flexible induc‐
tion cooking area".
The control bar blinks
twice and turns off.
PowerSlide operates. Two
pots are placed on the flexi‐
ble induction cooking area or
the cookware covers more
than one cooking area acti‐
vated by the function.
Use only one pot. Refer to
"Flexible induction cooking
area".
www.aeg.com
26
