an acute angle and move the
blade on the surface .
–
Remove after the appliance is
sufficiently cool:
limescale rings ,
water rings, fat stains, shiny metal-
lic discolorations. Use a special
cleaning agent for glass ceramic
or stainless steel.
2.
Clean the appliance with a moist
cloth and some detergent.
3.
At the end
rub the appliance dry
with a clean cloth.
7.
TROUBLESHOOTING
Problem
Possible cause
Remedy
You cannot activate the
appliance or operate it.
Activate the appliance
again and set the heat
setting in less than 10
seconds.
You touched 2 or more
sensor fields at the same
time.
Touch only one sensor
field.
There is water or fat
stains on the control
panel.
Clean the control panel.
The appliance deacti-
vates.
You put something on
the sensor field
.
Remove the object from
the sensor field.
The residual heat indica-
tor does not come on.
The cooking zone is not
hot because it operated
only for a short time.
If the cooking zone oper-
ated sufficiently long to
be hot, speak to the
service centre.
The sensor fields be-
come hot.
The cookware is too
large or you put it too
near to the controls.
Put large cookware on
the rear cooking zones if
necessary.
comes on.
The Automatic Switch
Off operates.
Deactivate the appliance
and activate it again.
comes on
The Child Safety Device
or the Lock function op-
erates.
Refer to the chapter
“Daily Use”.
comes on
No cookware is on the
cooking zone.
Put cookware on the
cooking zone.
The cookware is incor-
rect.
Use the correct cook-
ware.
The diameter of the bot-
tom of the cookware is
too small for the cooking
zone.
Move cookware to a
smaller cooking zone.
ENGLISH
11
