2.
Move the upper basket to the lowest
level to reach the spray arm more
easily.
3.
To detach the spray arm (
C
) from the
delivery tube (
A
), turn the mounting
element (
B
) counterclockwise and
pull the spray arm downwards.
4.
Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes. Run the water
through the holes to wash soil
particles away from the inside.
5.
To install the spray arm (
C
) back,
insert the mounting element (
B
) in
the spray arm and fix it in the delivery
tube (
A
) by turning it clockwise. Make
sure that the mounting element locks
into place.
6.
Install the cutlery drawer on the
sliding rails and insert the stoppers.
11.
TROUBLESHOOTING
WARNING!
Improper repair of the
appliance may pose a
danger to the safety of the
user. Any repairs must be
performed by qualified
personnel.
The majority of problems that may
occur can be solved without the need
to contact an Authorised Service
Centre.
Refer to the below table for information
on possible problems.
With some problems, the display shows
an alarm code.
Problem and alarm code
Possible cause and solution
You cannot activate the ap-
pliance.
• Make sure that the mains plug is connected to the
mains socket.
• Make sure that there is no damaged fuse in the fuse
box.
www.aeg.com
22