background image

Problem

Possible cause and solution

Limescale deposits on the ta-
bleware, on the tub and on
the inside of the door.

• The level of salt is low, check the refill indicator.
• The cap of the salt container is loose.
• Your tap water is hard. Refer to 

"The water softener"

.

• Use salt and set regeneration of the water softener

even when multi-functional tablets are used. Refer to 

"The water softener"

.

• Start the Machine Care programme with a descaler

designed for dishwashers.

• If limescale deposits still remain, clean the appliance

with appliance cleaners which are particularly suitable
for this purpose.

• Try a different detergent.
• Contact the detergent manufacturer.

Dull, discoloured or chipped
tableware.

• Make sure that only dishwasher-safe items are washed

in the appliance.

• Load and unload the basket carefully. Refer to the bas-

ket loading leaflet.

• Place delicate items in the upper basket.
• Activate the GlassCare option to ensure special care

for glassware and delicate items.

Refer to 

"Before first use"

"Daily use"

, or 

"Hints and

tips"

 for other possible

causes.

12. 

PRODUCT INFORMATION SHEET

Trade Mark

AEG

Model

FSK63737P 911434531

Rated capacity (standard place settings)

15

Energy efficiency class

A+++

Energy consumption in kWh per year, based on 280
standard cleaning cycles using cold water fill and the
consumption of the low power modes. The actual ener-
gy consumption will depend on how the appliance is
used.

241

Energy consumption of standard cleaning cycle (kWh)

0.846

Power consumption in off mode (W)

0.50

Power consumption in left-on mode (W)

5.0

ENGLISH

25

Summary of Contents for 911434531





























Reviews: