background image

4.

Carefully shake the funnel by its

handle to get the last granules

inside.

5.

Remove the salt around the opening

of the salt container.

6.

Turn the cap of the salt container

clockwise to close the salt container.

CAUTION!

Water and salt can come out

of the salt container when

you fill it. After you fill the

salt container, immediately

start the shortest

programme to prevent

corrosion. Do not put dishes

in the baskets.

7.2 

How to fill the rinse aid

dispenser

A

B

C

CAUTION!

Only use rinse aid designed

specifically for dishwashers.

1.

Open the lid (

C

).

2.

Fill the dispenser (

B

) until the rinse

aid reaches the marking ''MAX''.

3.

Remove the spilled rinse aid with an

absorbent cloth to prevent excessive

foam formation.

4.

Close the lid. Make sure that the lid

locks into position.

Fill the rinse aid dispenser

when the indicator (

A

) is

clear.

8. 

DAILY USE

1.

Open the water tap.

2.

Press and hold   until the appliance

is activated.

3.

Fill the salt container if it is empty.

4.

Fill the rinse aid dispenser if it is

empty.

5.

Load the baskets.

6.

Add the detergent.

7.

Select and start a programme.

8.

Close the water tap when the

programme is complete.

www.aeg.com

14

Summary of Contents for 911434531





























Reviews: