51
If you are unable to remedy the problem by following the above
suggestions, please contact your dealer or the Customer Care De-
partment.
1
Warning!
Repairs to the appliance are only to be carried out by quali-
fied service engineers. Considerable danger to the user may result from
improper repairs.
3
If the appliance has been wrongly operated, the visit from the customer
service technician or dealer may not take place free of charge, even
during the warranty period.
Display is switching be-
tween two heat settings
Power management is re-
ducing the power of this
cooking zone
See the section “Switching
the power function on and
off”
flashes
Unsuitable cookware
Use suitable cookware
No cookware on the cook-
ing zone
Place cookware on the
cooking zone
The diameter of the bot-
tom of the cookware is too
small for the cooking zone
Move onto a smaller cook-
ing zone
Use suitable cookware
is lit
Overheating protection for
the cooking zone has been
triggered
Switch off the cooking
zone. Switch the cooking
zone on again
Safety cut-out has been
triggered
Switch off the cooking
zone. Switch the cooking
zone on again
and number are dis-
played
Electronics fault
Disconnect the appliance
from the electrical supply
for a few minutes (Take the
fuse out of the house’s wir-
ing system)
If after switching on again,
is displayed again, call
the customer service de-
partment
and minus are displayed Light rays that are too
strong on the control pan-
el, for example bright sun-
light
Briefly shade the control
panel, for example with
the hand Acoustic signal
sounds, appliance switches
itself off Switch appliance
on (again)
Problem
Possible cause
Remedy