AEG 68001K-MN, Installation And Operating Instructions Manual

Page: 21 / 84

21
If you are unable to remedy the problem by following the above
suggestions, please contact your dealer or the Customer Care De-
partment.
1
Warning! Repairs to the appliance are only to be carried out by quali-
fied service engineers. Considerable danger to the user may result from
improper repairs.
3
If the appliance has been wrongly operated, the visit from the customer
service technician or dealer may not take place free of charge, even
during the warranty period.
f
flashes Unsuitable cookware Use suitable cookware
No cookware on the cook-
ing zone Place cookware on the
cooking zone
The diameter of the bot-
tom of the cookware is too
small for the cooking zone Move onto a smaller cook-
ing zone
Use suitable cookware
_
is lit Overheating protection for
the cooking zone has been
triggered Switch off the cooking
zone. Switch the cooking
zone on again
e
and number are dis-
played
Electronics fault Disconnect the appliance
from the electrical supply
for a few minutes (Take the
fuse out of the house’s wir-
ing system)
If after switching on again,
e
is displayed again, call
the customer service de-
partment
Problem Possible cause Remedy