AEG 63Z, Instruction Manual

Page: 23 / 145

Manual for Model 63Z
Changing the presser foot
Attention:
Turn the power switch to off ("O") when
carrying out any of the below operations!
Removing the presser foot
Raise the presser foot.
Press the lever and the foot disengages.
Lever
Attaching the presser foot
Lower the presser foot holder until the cut-
out is directly above the pin.
Press the lever.
The presser foot engages automatically.
Cut-out
Pin
Removing and inserting the presser foot
holder
Raise the presser foot bar. Align the
presser foot holder with the lower left side
of the presser bar. Hold the presser foot
holder, then tighten the screw using the
screwdriver.
Presser foot bar
Presser foot holder
Inserting the edge/ quilting guide
Insert the edge/ quilting guide in the slot
as illustrated. Adjust according to need for
hems, pleats, etc.
Slot
Edge/quilting guide
1
1
2
1
2
2
1
1
1
2
1
2
1
2
21