8
Protection of the glass
ceramic surface
A protective film should be applied
to the glass ceramic surface before
use. This will make it easier to
clean the surface, as well as
preventing substances from being
burnt onto the surface.
This is what to do:
1. Pour a few drops of ceramic
cleaning detergent such as
vitroclen onto a piece
of kitchen roll and rub the
detergent into the entire surface.
2. Polish the surface with a clean
cloth until it is dry.
25
Problems
Zones will not come on, Child
safety device has been activated.
Zones will not come on, Autostop
has been activated.
Solution
Turn the 2 display shows control
buttons with symbol for child safety
device to simultaneously. Then activate
one of the zones within 10 seconds.
Turn all the control display shows
buttons to 0. The zones can now be
used.
S A
F E
If after all these checks, your hob still does not operate correctly, contact
your local AEG Service Force Centre.
In-guarantee customers should ensure that the above checks have been made
as the engineer will make a charge if the fault is not a mechanical or
electrical breakdown.
Please note that it will be necessary to provide proof of purchase for any in-
guarantee service calls.
