AEG 6230267, Original Instructions Manual

Page: 14 / 16

14
14
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
VKRFN¿UHDQGRUVHULRXVLQMXU\
Save all warnings and instructions for future reference.
IMPACT SCREWDRIVER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring.
Fasteners contacting a “live” wire may make
exposed metal parts of the power tool “live” and could give the
operator an electric shock.
Sawdust and splinters must not be removed while the machine
is running.
:KHQ ZRUNLQJ LQ ZDOOV FHLOLQJ RU ÀRRU WDNH FDUH WR DYRLG
electric cables and gas or waterpipes.
Remove the battery pack before starting any work on the
machine.
Do not dispose of used battery packs in the household refuse
or by burning them.
AEG Distributors offer to retrieve old batteries
to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
Use only System GBS chargers for charging System GBS
battery packs.
Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme
load or extreme temperatures. In case of contact with battery
acid wash it off immediately with soap and water.
In case of eye
contact rinse thoroughly for at least 10 minutes and immediately
seek medical attention.
SPECIFIED CONDITIONS OF USE
The cordless impact driver may be used to tighten and loosen
nuts and bolts for independent use away from mains supply.
Do not use this product in any other way as stated for normal
use.
BATTERIES
New battery packs reach full loading capacity after 4 - 5 chargings
and dischargings. Battery packs which have not been used for
some time should be recharged before use.
Temperatures in excess of 50°C reduce the performance of the
battery pack. Avoid extended exposure to heat or sunshine (risk
of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged,
after used.
To obtain the longest possible battery life remove the battery pack
from the charger once it is fully charged.
For battery pack storage longer than 30 days:
‡ Store the battery pack where the temperature is below 27°C
and away from moisture.
‡ Store the battery packs in a 30% - 50% charged condition.
‡ Every six months of storage, run battery down by minimum 20%
then charge the pack as normal.
BATTERY PACK PROTECTION LI-ION BATTERY
The battery pack has overload protection that protects it from being
overloaded and helps to ensure long life. Under extreme stress the
battery electronics switch off the machine automatically. To restart,
TECHNICAL DATA Cordless Impact Screwdriver BSS18CB3
Rated voltage 18 V
Tool reception ´PP
No load speed (low) 0 - 750 min
-1
No load speed (medium) 0 - 2000 min -1
No load speed (high) 0 - 2750 min -1
Impact rate 0 - 3500 min
-1
Max torque with battery (6.0 Ah) 220 Nm
0D[GLDPHWHUEROWQXW M14
Weight - not including battery pack 1.09 kg
BATTERY AND CHARGER
Compatible battery pack
(not included)
Compatible charger
(not included)
L1815R
L1820R
L1825R
L1830R
L1840R
L1850R
L1860R
BL1218
AL1218G
Use AEG 18V battery and charger only