
Problem
Possible cause
Remedy
comes on
Overheating protection
for the cooking zone op-
erates
Switch off the cooking
zone. Switch on the
cooking zone again
comes on
No cookware on the
cooking zone
Put cookware on the
cooking zone
comes on
Not correct cookware
Use the correct cook-
ware
comes on
The diameter of the bot-
tom of the cookware is
too small for the cooking
zone
Move cookware to a
smaller cooking zone
and number come on
There is an error in the
appliance
Disconnect the appli-
ance from the electrical
supply for some time.
Disconnect the fuse from
the electrical system of
the house. Connect
again. If
comes on
again, speak to the After
Sales Service
come on
There is an error in the
appliance, because a
cookware boils dry or
you use not correct
cookware. Overheating
protection for the cook-
ing zone operates. The
automatic switch-off op-
erates
Switch off the appliance.
Remove the hot cook-
ware. After approximate-
ly 30 seconds switch on
the cooking zone again.
should disappear,
residual heat indicator
can stay. Cool down the
cookware and check it
with the section Cook-
ware for the induction
cooking zone
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
13.
INSTALLATION
WARNING!
Refer to the Safety chapters.
Dimensions
Height
847 - 867 mm
ENGLISH
33