The heat setting
Touch the control bar at the necessary heat
setting. Change to the left or the right, if it
is necessary. Do not release before you have
a correct heat setting. The display shows the
heat setting.
/
Switching the outer rings on and off
You can match the effective heating surface to the size of the cookware.
To switch on the outer ring touch the sensor field /
. The indicator comes on. For
more outer rings touch the same sensor field again. The next indicator comes on.
Do the procedure again to switch off the outer ring. The indicator goes out.
The Automatic heat up
The Automatic heat up function sets the
highest heat setting for some time, and
then decreases to the necessary level.
To start function touch the symbol
and than set the necessary heat setting.
comes on when the cooking zone oper
-
ates on the highest heat setting.
To stop the function change the heat set
-
ting.
1
2
3
4
5
6
7
8
9
10
11
12
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Using the Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for one cooking
session.
Set the Count Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
•
Selection of the cooking zone:
touch again and again until the indicator of a
necessary cooking zone comes on.
•
Starting the Count Down Timer:
touch of the timer to set the time (
00
-
99
minutes). When the indicator of the cooking zone flashes slower, the time counts down.
•
Checking the remaining time:
select the cooking zone with . The indicator of the
cooking zone flashes faster. Display shows the remaining time.
•
Changing the Count Down Timer:
select the cooking zone with touch or .
A
8
Operating the appliance
