7.
Clean the oven door with water and
soap. Clean inner side of the door.
Dry the oven door carefully.
When the cleaning is completed, install
the glass panels and the oven door. To
install the oven door, do the above steps
in the opposite sequence.
4
4
5
5
6
12.6
Replacing the lamp
Put a cloth on the bottom of the interior
of the appliance. It prevents damage to
the lamp glass cover and the cavity.
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1.
Deactivate the appliance.
2.
Remove the fuses from the fuse box
or deactivate the circuit breaker.
The back lamp
1.
Turn the lamp glass cover
counterclockwise to remove it.
2.
Clean the glass cover.
3.
Replace the lamp with a suitable 300
°C heat-resistant lamp.
4.
Install the glass cover.
13.
TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1
What to do if...
Problem
Possible cause
Remedy
There is no spark when you
try to activate the spark gen-
erator.
The hob is not connected to
an electrical supply or it is
connected incorrectly.
Check if the hob is correctly
connected to the electrical
supply. Refer to the connec-
tion diagram.
There is no spark when you
try to activate the spark gen-
erator.
The fuse is blown.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
There is no spark when you
try to activate the spark gen-
erator.
Burner cap and crown are
placed incorrectly.
Place the burner cap and
crown correctly.
www.aeg.com
22
Summary of Contents for 10306GM-MN
Page 1: ...EN User Manual Cooker 10306GM MN ...
Page 33: ...ENGLISH 33 ...
Page 34: ...www aeg com 34 ...
Page 35: ...ENGLISH 35 ...
