AEG 1000 W, Instructions For Use Manual

Page: 19 / 100

English 19
Technical data
Model 1000 W 1500 W
Rated input voltage 12 V DC
Output 230.0 V AC / 50 hz;
uSB: 5.0 V DC
Output voltage uSB: 2.1 A
Wave form Sinusoidal wave
Ambient temperature 0˚C - 30˚C
Overvoltage protection 15.5 V ±0.5 V
undervoltage protection 10.0 V ±0.5 V
Overheat protection <68 ˚C
Input voltage range 11 - 15 V DC
Low battery shutdown 10.0 V DC ±0.5 V
Frequency cordless remote
control module
433,92 Mhz
Max. transmission power -49,65 dBm
Specific technical data (pure sinusoidal wave)
Model 1000 W 1500 W
Item number 10057 10058
Continuous power output 1000 W 1500 W
Peak power output (0.1
sec.)
2000 W 3000 W
Dimensions in mm 320 x 200
x 70 360 x 200
x 70
Weight 2,25 kg 2,75 kg
Overload protection 1100 W
±100 W 1650 W
±150 W
Fuse 4 x 40 A 6 x 40 A
Normal use
The power inverter is intended to convert 12 V
direct current voltage to
•
alternating current voltage 230 V/50 hz and/or
•
direct current voltage of 5 V/max. 2.1 A (2.0 USB).
The voltage converter is only intended for perma -
nent installation.
This device is not intended for use by children or
persons with limited mental capacity or lacking
experience and/or lacking expertise. Children should
be supervised to ensure they do not play with the
device.
This device is not intended for commercial use.
Any other use or modification of the device is con -
sidered improper and involves significant risks. The
manufacturer assumes no liability for damages due
to improper use.
Contents
Check the package contents immediately after un -
packing. Check the device and all parts for damage.
Do not use a defective device or parts.
•
Power inverter with 12 V connector
•
Cordless remote control module
•
2 cables with ring lugs/clamps
•
operating instruction
Please include all relevant documentation to other
users!
The operating instructions are also available at the
following Internet address:
http://iuqr.de/ModifiedConverter