36
Using the Appliance
Before Use
Remove all securing tapes.
Wash the inside of the appliance
with lukewarm water with a little
bicarbonate of soda added (5 ml
to 0,5 litre of water). Do not use
soap or detergent as the smell
may linger. Dry the appliance
thoroughly.
Do not use detergents, abrasive
powders, highly perfumed cleaning products, wax polishes or products
containing alcohol.
To Start the Appliance
1.
Allow the appliance to stand for 2 hrs after installation.
2.
Plug in the appliance and switch on at the mains supply.
3.
Turn the thermostat control to the required setting. A setting of 3 is usually
suitable for normal operation (see thermostat control).
4.
Leave the appliance for approximately 4 hours for the correct temperature to
be reached before placing food inside.
Thermostat Control
The thermostat control situated inside the refrigerator regulates the
temperature of the larder compartment. Thermostat control is marked from
1-5 the higher the number, the colder the setting.
Position 0 -
Off
Position 1 -
minimum coldness
Position 5 -
maximum coldness
Summary of Contents for S17TK58
Page 66: ...66 N AE 45 2 08...
Page 67: ...67...
