The water in the condense water tank will never automatically fill the steam water
tank.
The water recirculation system works only if it is supplied by water arising during
standard drying cycles.
To activate this system turn the valve in ON position. When the valve is ON the
steam water tank will be filled during the next drying cycle. Water will be supplied
by the water circuit directly to the steam water tank filling it automatically.
To activate recirculation set valve in ON position. To do that:
1. Pull drawer containing condensed
water container out a little. Behind
the drawer there are two elements:
1
steam water inlet - for manual
refilling of steam water
container.
2
water recirculation system valve/
filter.
2. turn the valve in ON position. Water
will be supplied by the water circuit
directly to the steam water tank fill
-
ing it automatically during the next
drying cycle.
The steam water tank is empty. Please fill
it and then press START
If valve is closed (OFF (UIT) position) - re
-
circulation system does not work.
ON
OFF
1
2
19
