14
Autostop
If by mistake one or more cooking
zones have not been turned off
Autostop will automatically turn off
the hob after a certain amount of
time. The time depends on the set-
ting. See below table. When
Autostop has been in function the
control lamp for
k
flashes.
Push
k
to reset Autostop.
Setting Max hours before auto
turn-off
6
5
4
1,5
1-2
3-4
5
6-9
Safety Turn-off
If one of the keys are activated for
more than 10 seconds (e.g. by a
child, pot spillage etc.) the hob is
automatically turned off.
23
Mounting
The unit may be mounted in any
type of kitchen worktop with a
thickness of 28 to 40 mm.
Cutting Out
When mounting the hob: Read the
instructions on this page. When
mounting this unit together with
other units: Read the instructions on
the next page.
For mounting this hob you need a
Philips screwdriver and the 4 clamp-
ing fittings supplied with this prod-
uct (see fig.).
Distance to Wall:
Minimum 150 mm to flammable
material. Minimum 50 mm to non-
flamable material.
1. Cut a hole in the table top
according to the measures stated.
See “Technical data”, “built-in
measurement”.
2. Place the unit upside down on a
mat. Take care that the top side is
not scratched.
3. Mount the clamping fittings in
the holes in the side of the base
panel (see fig.)
4. Place the unit in the hole and
tighten the clamping fittings to
the table top using a screwdriver.
Clamping fittings
Mounted clamping fittings
