background image

• Make sure that cutlery and dishes do

not bond together. Mix spoons with

other cutlery.

• Make sure that glasses do not touch

other glasses.

• Put small items in the cutlery basket.

• Put light items in the upper basket.

Make sure that the items do not

move.

• Make sure that the spray arm can

move freely before you start a

programme.

10.5 

Before starting a

programme

Make sure that:
• The filters are clean and correctly

installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is dishwasher salt and rinse aid

(unless you use multi- tablets).

• The position of the items in the

baskets is correct.

• The programme is applicable for the

type of load and for the degree of

soil.

• The correct quantity of detergent is

used.

10.6 

Unloading the baskets

1.

Let the tableware cool down before

you remove it from the appliance.

Hot items can be easily damaged.

2.

First remove items from the lower

basket, then from the upper basket.

At the end of the

programme water can still

remain on the sides and on

the door of the appliance.

11. 

CARE AND CLEANING

WARNING!

Before maintenance,

deactivate the appliance and

disconnect the mains plug

from the main socket.

Dirty filters and clogged

spray arms decrease the

washing results. Make a

check regularly and, if

necessary, clean them.

11.1 

Cleaning the filters

The filter system is made of 3 parts.

C

B

A

1.

Turn the filter (

B

) counterclockwise

and remove it.

ENGLISH

15

Summary of Contents for FAVORIT55322VI0

























Reviews: