EN
2
23
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to
the chimney using either a flexible or rigid pipe ø 150
or 125mm, the choice of which is left to the installer.
To install a ø 150
• To install the dumper
10a
.
• Fix the pipe in position using sufficient pipe clamps
(not supplied).
To install a ø 125
• To install a ø 125 mm air exhaust connection, insert
the reducer flange
9
on the dumper
10a
.
• To install the Adapting ring
10b
.
• Fix the pipe in position using sufficient pipe clamps
(not supplied).
• Remove any activated charcoal filters.
ø 125
25
10a
9
10b
10a
ø 150
25
Recirculation version air outlet
• Fix the connection
15
to the frame using the 4
screws provided
.
• Fix the flange
10
to the lower opening of the connec-
tion
15
.
• Connect the hood air outlet to the flange in the lower
part of the junction using a rigid or flexible ø 150
tube (by installer’s choice).
15
10
