AEG Electrolux CP 3, Operating Instructions Manual, Page: 30 / 36

g
53
14 Ordering Accessories
To ensure years of satisfaction with
your coffee machine and prevent
faults arising, it is very important to
regularly clean and descale the coffee
machine. The original cleaning tablets
and descalant are obtainable direct
from us.
If you live in Germany, please call our
Order Hotline
Tel. 0 18 01-20 30 90.
15 What do I do, if ...
• ... coffee-making is interrupted and
«
REFILL WATER
» is displayed?
– The water tank is empty: Refill the
water tank and press the „OK“ key
(Fig. 3, g).
• ... coffee-making is interrupted and
the indications «
CLEAN
BREWING UNIT
» and
«
SWITCH OFF UNIT
» are shown
alternately?
– Brewing unit is overfilled: Carefully
clean the brewing unit; see
„Cleaning the Coffee-making Unit“
page 49.
– In powder mode spoon in a max. of 2
measuring spoons of ground coffee.
• ... the machine can no longer be
operated and «
WASTE CONTAI-
NER
» is indicated?
– Container is full: Empty container
and clean thoroughly; see „Emptying
the Container“ page 48.
• ... the machine can no longer be
operated and «
CLEAN BREWING
UNIT
» and «
SWITCH OFF
UNIT
» are shown alternately?
– Brewing unit is blocked or overfilled:
see „Cleaning the Coffee-making
Unit“ page 49; remove all coffee
residues from the brewing unit.
– Spoon in a little ground coffee.
– Set a small coffee quantity; see
„Changing and saving the coffee
quantity“ page 45.
– Check ejector.
– If you are unable to remedy the
fault, please contact the AEG
Serviceline.
• ... «
CARRY OUT CLEANING
PROCESS
» is displayed?
– Number of coffees dispensed
necessitates cleaning: Run cleaning
program; see „Running the Cleaning
Program“ page 50.
• ... «
CARRY OUT DESCALING
»
is displayed?
– Number of coffees dispensed
necessitates descaling: Carry out
descaling; see „Running the
Descaling Program“ page 51.
• ... the espresso/coffee is not hot
enough?
– Preheat the cups with hot water.
– Increase coffee temperature; see
„Setting the Coffee Temperature“
page 46.
– The coffee machine may need
descaling.
• ... the espresso/coffee is too weak?
– not enough ground coffee: spoon in
correct measure, max. 2 measuring
spoons.
– The coffee bean container is empty.
Add coffee beans.
– The coffee quantity is set too low.
Increase the coffee quantity, see
„Changing and saving the coffee
quantity“ page 45.
– The grinding texture is set too
coarse. Set the grinding texture to a
finer grade, see „Setting the
Grinding Texture“ page 45.
• ...the crema is too weak?
– Use fresh water.
– Use fresh beans or fresh coffee
powder.
– Clean the coffee-making unit, see
„Cleaning the Coffee-making Unit“
page 49.
822_949_320 CP3500_denepf.book Seite 53 Freitag, 16. September 2005 12:04 00