AEG Electrolux COMPETENCE B 8139-5-m, User Instructions, Page: 48 / 68

OPERATING INSTRUCTIONS
48
Side Rails
The side rails on the left and right hand sides of the oven can be
removed for cleaning the side walls.
Removing and Fitting the Side Rails
�
1.
Using a screwdriver, undo
the side rail retaining
screws.
2.
Remove rail to the front.
3.
To refit, reinsert rail.
4.
Fix both side rails in place
again using the screws.
Warning!
To use the oven, insert the tray or grid supplied onto the side
guides inside the oven. Do not put containers or food on the floor of
the oven, always use the trays and grids.
Inserting the oven shelf
•
Insert the oven shelf so that the feet point downwards.
• Push the oven shelf between the guide bars of the selected oven
level.
�
The oven shelf has a small bulge on
the left and right front part. This
bulge is an additional device to pre-
vent cookware and oven shelf from
slipping.
!
OPERATING INSTRUCTIONS
49
Oven Light Bulb
Warning!
There is a risk of electric shock! Before changing the light
bulb in the oven:
•
Switch off the oven!
•
Isolate the oven from the power supply.
Replacing the Light Bulb in the Oven/Cleaning the Glass
. �
1.
Place a cloth on the floor of
the oven.
2.
Carefully remove the glass
cover.
To do this, use a blunt tool
such as a flat bladed screw-
driver, under the glass cover.
3.
Replace oven halogen light
bulb (25 W, 12 V, heat-
resistant up to 300 °C).
4.
Replace the glass cover.
5.
Remove the cloth from the
oven.
!