AEG Electrolux COMPETENCE B 8139-5-m, User Instructions, Page: 23 / 68

OPERATING INSTRUCTIONS
22
3.
Set the temperature and function.
While roasting the display on the right
shows the current core temperature
inside the roast.
When the actual core temperature
reaches the value you have set, the
oven will switch itself off and “End” will
appear in the display. A warning signal
will sound. Both of the lamps next to
the display will stop flashing.
4.
Press any button to stop the alarm
buzzer.
Both lights next to the display will flash
alternately - as long as the meat probe
is inserted.
5.
Turn the temperature selector and the
function selector control knob to “0”.
6.
Remove the meat probe from the socket. The display will show the time
of day again.
OPERATING INSTRUCTIONS
23
Meat Probe, function with delayed start
This allows you to delay the start of cooking when using the meat
probe. As no fixed cooking time is set, it is not possible to set a finish
time.
Tip:
This function will only work when the meat probe is inserted.
The right display shows you the current core temperature inside the
roast and “70 °C” will appear in the left display. Both lamps will flash
alternately.
�
1.
If you wish to change the preset tem-
perature push
P
” the lamp over
P
”
flashes.
2.
Change the recommended temperature
of 70 °C with “
+
” or “
-
” to set the
desired temperature.
After approx. 3 second the timer will
start and the lamp will stay on continu-
ously.
3.
Press
U
to confirm the input and select
the start time. The display shows you
the current time of day.
4.
Use “
+
” or ”
-
” to set the start time.
After approx. 3 seconds the timer will
start and the lamps will stay on contin-
uously. The display will show ”Auto”