g
22
Incidentally:
When the
“Water
Tank“ indicator (Figure 2/N) illumi-
nates, your appliance is signalling to
you that the water tank must be
refilled.
2.2. Filling the Bean Container
(Figure 5)
Open the lid of the bean container
(Figure 1/D) and fill the container with
roasted coffee beans (do not use fro-
zen and caramelised beans). Ensure
that no foreign bodies enter the bean
container. Close the lid.
Tip
: You can use both espresso and fil-
ter coffee beans! Try out different sorts
of beans to find the ones that taste the
best to you!
2.3. Adjusting the Grinding Tex-
ture (Figure 6)
To release the full aroma from the
beans, you can adjust the grinding tex-
ture to suit the roasting of the beans.
The grinding texture adjustment is on
the rear right inside the bean con-
tainer.
Important:
The grinding texture is only
to be adjusted when the grinder is in
operation.
Starting from the factory medium set-
ting, turn the adjustment knob clock-
wise for
darker beans (coarser
grinding texture), anticlockwise
for
lighter beans (finer grinding tex-
ture)
.
Tip:
Try different grinding textures to
find the one that suits your taste the
best!
2.4. Switching On the Appliance
(Figure 7)
By pressing the
“On/Off“ button
(Figure 2/B) for approx. 1 second, you
can switch on the appliance. The red
power indicator (Figure 2/A) illumi-
nates.
Only when using the appliance for
the first time:
To show that the system must be filled,
the green
“1 Strong Cup“,
“1
Normal Cup“,
“Ground Coffee“
and
“Flush“ indicators flash
(Figure 7).
0
Place an empty cup under the swivel-
ling nozzle (Figure 1/F).
0
Turn the selector dial (Figure 1/E) anti-
clockwise to the stop.
0
Hot water runs out of the swivelling
nozzle and is stopped automatically.
0
Turn the selector dial again in a
clockwise direction to “0”.
If the 4 green lights are still flashing,
please repeat this procedure.
To show that the appliance is heating
up, the display
“1 cup normal”
flashes.
The working temperature has been
reached when the display
“1 cup
normal” is lit.
2.5. “Flushing“ the Appliance
(Figure 8)
When the operating temperature is
reached, the green
“Flush“ indica-
tor (Figure 2/J) illuminates. Place an
empty cup under the spouts (Figure
1/H) and press the
“Flush“ button
(Figure 2/K). The flushing process stops
automatically. The
“1 Cup of Nor-
mal Coffee“ indicator (Figure 2/D) then
illuminates. The appliance is now ready
for brewing coffee.
Note:
The water left in the appliance is
removed from the the system by the
flushing action so that coffee is made
with fresh water.
3. Making Coffee
Although you are brewing espresso
coffee with your coffee machine, the
term
coffee
is used in the following for
clarity.
Note:
The following process starts
completely automatically
after
the
“1 Cup“ or
“2 Cups“ button
is
pressed: grinding, portioning, press-
ing, pre-brewing, brewing, and ejection
of the used ground coffee.
You can interrupt this process at any
time by pressing the
“1 Cup“
or
“2 Cups“ button!